Heavy Metal Affliction '82 Porsche Carrera RS Replica

Heavy Metal Affliction '82 Porsche Carrera RS Replica

Among Porsche enthusiasts possibly the most revered 911 model is the 1973 Porsche 911 Carrera RS. Porsche’s incredible racing history began in earnest here. The Carrera RS was built for homologation, meaning Porsche needed to build 500 production cars to meet racing requirements. The Carrera RS was so well received, and demand was so great, that 1,580 were built and sold. In its day, the RS’s performance was the equivalent to the Porsche Cup cars of today.

Since so few were made and appreciation for them has increased over time, owning an original 1973 Carrera RS is out of reach for anyone but those with the deepest of pockets. Furthermore, those that do own them cherish them. If they are raced at all they are at infrequent vintage racing events.

Enter Forza community member sEEkEr 911rs from south Florida, who has chosen to go by Gamertag only here for professional reasons. A Porsche enthusiast and Porsche Club racer, sEEkEr has been building and racing Porsche’s for quite some time. sEEkEr has what may be the perfect combination of mechanical skills, racing knowledge, and budget needed to build exactly what he wanted. He decided to build a track-worthy 1973 Porsche Carrera 911 RS clone. To say sEEkEr did it right would be an understatement. The car is a spot-on tribute to the RS, not only in its looks, but in its core attributes. sEEkEr looked to lighten wherever possible and blessed the car with reliable, robust Porsche power so it can do its duty at the track. The end result was a 2,240-pound car with 300 horsepower.

The project was undertaken with a budget in mind and a deadline to meet, the deadline being a season-opening Porsche Club race weekend. For a project of this caliber, first you need a donor car, a car that will sacrifice what it is to become something greater. sEEkEr had just the car for this, a 1982 Porsche 911 SC, a wide-body 911 whose style had lost favor with him. So he took to it like a breaker from a spare parts yard and cut-away the fenders, and removed the hood and decklid—all of which were re-sold to loving new owners. Then he set about installing narrow-body, lightweight, fiberglass fenders, a fiberglass hood, and the distinctive RS ducktail deck lid--also fiberglass.

In the 100-degree Florida heat, sEEkEr spent hours inside the stripped tub. He removed everything that wasn’t essential to making the car go fast. Sound deadening, gone; back seats, gone; radio, carpets, door cards, all gone to aid in reaching the target weight of 2,200 pounds.

With the collective knowledge of several Porsche enthusiast forums to ensure every build choice was a proven winner, sEEkEr came to a key decision, namely, what to power the RS clone with? The goal was not to replicate the original RS, nor was it to make it the most powerful beast any of his fellow club members had ever seen. According to sEEkEr, “I researched many previous builds searching through the countless options I had for my ultimate goal of reasonably high HP with proven reliability, and a HP to weight ratio somewhere between 7 and 8lbs.” The powerplant chosen was a factory-built 1995 3.6-liter from a Porsche 993. This low-maintenance, 300-horsepower motor, was literally a “plug and play” fitment, thanks to readily available kits on the market. The only mods the 993 engine has seen are external: headers, performance exhaust, and a high-flow air filter. Then a chip reprogram to optimize the free breathing upgrades. That’s it.

Once the engine and transaxle—which is stock as well—were test fitted, it was time for the tub to head off to the paint and fabrication shop. sEEkEr is a capable mechanic and had done all the mechanical work in his own shop. Paintwork, however, isn’t his bag. As he humbly states, “I have a deep respect for the artists who paint cars, both in Forza and in real life. I can rebuild virtually any automobile engine that’s been invented, but when it comes to finely detailed work like paint and body I’m all thumbs.” At the fab shop the first order of business was fitting a huge Mazda RX-7 oil cooler in the nose. This was easier said than done, and required some additional “lightening” by cutting away a bit of the nose. After all the prep was done, four coats of epoxy paint were applied. Since this car was going to endure a life on the track, durability came before a “garage queen” finish.

Upon returning from paint and fabrication, the RS clone had its namesake looks but was far from finished. Arguably the most important part of the build, the suspension and brakes, were next to be installed. sEEkEr puts it like this, “As every Forza racer knows, if you can’t turn and you can’t stop, you can’t race.” Before ever starting the project sEEkEr spent hours crunching figures and researching his setup. He calculated spring weights, sway bar dimensions, and weight distribution. These keen decisions were intent to imbue the RS clone with the utmost agility. It wouldn’t be until the first track day that sEEkEr would discover how effective his choices would be.

Check out the Heavy Metal Affliction Spec Sheet to see what parts went into the build.

As a long-time Porsche Club member with frequent access to such hallowed tracks as Sebring, Homestead, Daytona, and Palm Beach International Raceway, sEEkEr was able to appreciate the fruit of his labors in those august environments. Did the car turn out as he hoped? The answer is yes, but sEEkEr states it best with the pride of ownership, “I’m happy to report that all my previous research has paid off quite well, the car handles like a dream. ’Extremely quick and nimble’ is how I would describe it, but I must say coming into Turn 10 at PBIR doing 135MPH during those first runs was pretty hairy!”

Recently, sEEkEr picked up Forza Motorsport 4 and the Porsche Expansion Pack. After building a Forza Motorsport 4 version of his RS that closely matched his RS’s specs, he headed to Sebring. After running a few laps he offered up this testimonial, “The shift points on my virtual RS are almost identical to my real car and top speed is amazingly accurate down the back straight.”

The sound of the RS clone will stir the heart and ears of any Porsche true believer. Enjoy this start up and drive-by video from sEEkEr.

And of course, the gallery of pictures for you to appreciate.

Over the next couple months your Heavy Metal Affliction author will be on a mandatory break from Turn 10. During this time ForzaMotorsport.net will feature a new HMA, written by yours truly—Johniwanna—once a month. These will be published on Thursday’s mid-month.

Until my triumphant return we will be archiving the request for community rides thread, as we don’t want candidates to have to wait too long for their chance to be featured.

This will also be the last HMA thread until I return. So if you have a comment about sEEkEr’s amazing build, post it in the HMA thread.


Back to the news