Heavy Metal Affliction - 1992 Ford Mustang GT
The day Nick Duda got his driver’s license, his dad sent him to the local drag raceway, Mission Raceway Park in Canada, with $75 and a pair of 8“ Mickey Thompson racing slicks. This wasn’t Duda’s first time going fast. Since he was five-years old, he had been doing launches hanging onto the roll bar behind his dad, George Duda. That $75 bought Nick’s way into his first test and tune where he went from running high 17s to low 13-second runs in his 1990 Mustang LX street car. Later that year, when Duda was caught street racing and the police officer called his father to tell him what his son was doing, his dad asked, “Well, did he win?” It’s this kind of support that has made Nick Duda the racer he is today.
Drag racing and high-performance are a family tradition with the Dudas. George has been racing since the 1970s and founded Mopac Auto Supply, Western Canada’s largest high performance retailer, in 1973. At one point, George Duda had 13 Hemi racing engines in his shop, all his own. The 1970 440 Cuda he used to race had a supercharger and a nitrous plate that ran in the low 9s. That car was also driven on the street. Since then George has retired and handed the reins of the business to his brother. Nick Duda is a professional dyno tuner and certified automotive tech, and he tunes cars for the family business when he isn’t racing.
This 1992 Mustang GT was purchased by George Duda from an insurance auction with 3,000 miles and no engine or transmission. Now 23 years later it only has 5,000 miles on it. That’s partially because it’s been in storage for some 15 years, after the chassis was stripped and rebuilt for racing, and partially since the rest of the miles have come one quarter-mile at a time.
After George Duda had the chassis built, he decided to retire and the Mustang sat in the back of the shop, serving as little more than a parts storage bin. It’s worth noting the Duda’s have built this car entirely on their own except chassis and transmission builds, something they are proud to be able to say. Nick had been working his way through different street cars, most recently with a 1989 fox body Mustang that had done a 10.2 at 133mph on its best day. Up to this point, Nick had never raced in anything safer than a t-shirt; he decided it was time to commit to a legal race car and go even faster. The chassis in the back of the shop was the logical candidate.
Nick sold his street car to finance the race car and George decided to partner 50/50 with his son in order to finish the car he started building 15 years previous. Three-quarters of the way through the build, the kitty was empty and they had yet to drop in a motor. Fortunately, a family friend who had been storing a short-block Chevy race motor in the shop since 1990, gave his blessing to use the motor to go racing. A quick dyno tune later and the SBC Mustang, as it has become known as, ended up running an 8.75 at 151 mph.
George Duda had gotten the Mustang licensed and had intentions of sharing driving duties. It wasn’t long after George decided the full fire suit and harnesses were not for him and Nick took over driving full-time. With a second stage of NOS, the eight-second car became a seven-second car. Then, in 2013, Duda dropped the NOS and shifted the direction of the car. They added a turbo-EFI system running methanol.
The change put Duda in a sharp learning curve as a tuner. The massive pull of the turbo, which propels the car off the line at 10 psi and hits 25-35 psi going down the track, never stops pulling until Duda lifts and pulls the chute. The Mustang ran a 7.13 on an aborted run; every time the car went down the track the team was amazed at how fast it was. If you have never watched a car like this launch, it is fantastic and surreal. The tires hook up and it is gone. Before your brain registers the awesomeness, the run is over and the light boards show the stats.
The next run was nearly catastrophic, as a rod exploded through the block at 180 mph. Chunks of engine block punctured the left rear tire sending Duda toward the wall. Drivers of cars with chutes keep their hand on the chute release just after shifting out of first, and in this case it saved the car and possibly Duda. As soon as he felt something wrong, he pulled the chute, which straightened out and slowed the car. The problem was they were running way too much power for the existing connecting rods, a lesson they learned the hard way but would soon remedy.
The new build uses stronger parts and they switched from a 16-inch wide tire to a “little” 10.5-inch wide tire. This puts the car in the 10.5 Outlaw class. The tires are anything but little at 33 inches tall, but the Dudas have gotten them dialed in and recently the car ran a 7.24 at 195 mph. Today through this weekend Duda and his team are at the Street Car Supernationals in Las Vegas where they will be “turning up the wick” as Duda said. As of this writing, they ran a 7.01 at 199.37, Duda said “Tomorrow, there is a 6 in it for sure.” This kind of speed in a full-bodied car seems phenomenal, but this is what cars like this can do.
With more and more racetracks struggling to stay open, it’s racers like Duda and cars like his Mustang that are contributing to the excitement of the sport and attracting new blood. This is a real car that goes really fast, not something unreachable like the pro cars. Of course a car like this isn’t built overnight, but it gives the newcomer to drag racing something to aspire to.
Even after more than 1,000 runs down the quarter-mile Duda still gets a thrill, but driving a 1,600 horsepower car that weighs just over 2,700 pounds doesn’t sound like something that would lose its luster much.
Now check out what may be the longest HMA spec sheet ever.
Back to the news