Heavy Metal Affliction - 1996 Nissan Silvia
“Do you drift it?” is the most common response Blane Burnett –gamertag Speed Asylum-- gets when people encounter his LS-swapped Nissan 240 in Silvia dress. Burnett has to smile and tell those appreciating his clean, stock (in appearance only) S14, that no, it was built for the track. Certainly the 419 wheel horsepower mildly upgraded LS2 can spin the tires, but Burnett is all about putting his grip to use in lowering lap times and being nice to cones in autocross and track day events, rather than shredding tires.
“Project LS2 S14,” as Burnett calls his build, is the result of years playing with Hot Wheels and making collages out of exotic car photos from his father’s car magazines as a boy. Early on he realized that rolling a Countach to school was likely not going to happen. Then, years later after going back and reading those magazines he robbed photos from and others like Sport Compact Car, he learned that serious performance can be found in affordable imports like the Nissan 240, especially if you swap in a V8 for the standard 4-cylinder.
Most of Burnett’s Bowling Green, KY car scene peers were more interested in building cars that would go fast in a straight line. On the other hand, Burnett was always interested in more technical driving, from taking on the wide range of local curvy country roads to driving his autocross-prepped Civic around on the city streets. “Becoming a fast driver was of more interest to me than having the fast car to make up for my mistakes,” Burnett said.
The Civic was eventually sold and Burnett evolved to a 1995 240SX that was sadly totaled. Knowing the Nissan chassis was ready from the factory to be a driver’s car, Burnett found another 240, this time a 1996 model. The previous owner had listed the car as needing a transmission but, upon trailering it home and inspecting it, Burnett found the drive axles were simply missing bolts, an easy fix.
The 240 served as a daily driver while Burnett finished college and later took on a role with Holley Performance. The well-used car was then called to candidacy for a build that would demonstrate that his new employer was no longer your granddad’s go-fast carburetor company. You might immediately associate Holley with NASCAR and NHRA but the company has evolved into a full-on performance products manufacturer. The company also manufactures NOS nitrous, LS swap products, superchargers, high quality race plumbing and more through the acquisition of nostalgic brands like NOS, Hooker Headers, Earl’s Performance Plumbing, Weiand, and Flowtech.
The LS- swap products are what drove the biggest change to “Project LS2 S14” and would provide the platform for Burnett to go the kind of fast he was trying to achieve. If you review Burnett’s detailed build thread you will quickly learn that he is a thorough researcher who doesn’t cut corners. With the advantage of Holley’s engineering and development lab space to get the job done and a wealth of knowledge working in that shop to answer questions, Burnett set about building a car he envisioned.
While there are many people to thank along the way, the build was up to Burnett to accomplish. Setting a deadline can be a forcing function so the goal was to have the car ready for the 2013 Hot Rod Power Tour. Step one, source an LS2 V8 and T56 transmission. After pulling and selling the SR20DET from his S14, Burnett sourced a motor from a totaled Pontiac GTO. For the build to be complete, the motor would see an aggressive cam, Hooker headers, and a Holley Dominator engine management system added, most all from the Holley catalog. Burnett didn’t just drop in the new motor and start whizzing about on the remaining high-mileage components. The car received upgraded, adjustable suspension and much more potent brakes to complete the package. Inside, the car got harnesses and a roll bar… just in case.
Getting “Project LS2 S14” ready in time came down to the final hour before Burnett and his father were scheduled to leave for the Hot Rod Power Tour. The last thing to be installed was the wiring harness. At the moment of truth, the car started up fine and ran flawlessly all the way to the start of the tour in Arlington, TX, to its end in Charlotte, NC and back to Bowling Green. Altogether the trip was more than 2,000 miles. “Without help from some key coworkers, good friends, and my father,” Burnett said, “the car wouldn’t have made the trip.” That road trip was only the car’s debut; true competition would be in its near future.
The Bowling Green region is fortunate to have recently been blessed with the building of NCM Motorsports Park. NCM stands for the National Corvette Museum which is right across the highway from the track facility. The Corvette assembly plant is there too, so as you might imagine there is an abundance of LS-powered cars in the area. Burnett’s S14 is a standout though, and he has spent many days at the NCM track including competitive events like the NCM Chapter of Optima Ultimate Street Car Challenge this past June where the car and driver took eighth place among a field of uniquely prepared cars.
One of the last modifications to optimize performance was to replace the staggered tire set up that was a significant boon to performance. The lack of front end grip was not allowing the car to make full use of the upgraded brakes and suspension or the power of the LS2. Understeer was very apparent in corner entry and with this kind of power under the hood more tire was necessary. Burnett rolled the front and rear fenders with some help from his father and a fender rolling tool to accommodate a square tire setup. The 18” Advan TCIII wheels wrapped in 275 wide Falken RT615Ks contribute to a much more planted feel and the extra rubber instills confidence on track.
There really isn’t much left of the old 240 in “Project LS2 S14” beyond the unibody and the interior and the rear end (that is slated for replacement soon). The car still maintains a deceivingly stock look, as was Burnett’s intention. Function meets form squarely. ”This car absolutely hauls the mail around the track,” as Burnett puts it.
The car is part showpiece to showcase what Holley products can do for import owners but it is anything but a garage queen. You could say its a treasured piece of JDM that has been domesticated for its own greater good.
You can also find a rendition of Burnett’s car in Forza Motorsport 6. Pick yourself up a 2000 Silvia Spec-R and put “HMA” or “Holley” in the description then add the livery and tune to your collection. Thanks to BDI for the custom design and tune.
Photo credits to Josh Creek.
Back to the news