Heavy Metal Affliction 1979 Subaru Wagon

Heavy Metal Affliction 1979 Subaru Wagon

“I never thought I’d get the reaction I did with this vehicle. I never thought I’d be invited to this or other shows since FEST. I’m happy for my friends in the old school community, and my friends that have helped with my car. There is a lot more to come. Long live old school!”

These are the words of die-hard Subaru fan Brandon Solsten after his 1979 Subaru Wagon, with his one-off air-ride suspension and many DIY mods, won Top Honors at FEST. FEST is one of a couple local (to Redmond, WA) car shows focusing on pre-1988 European and Japanese rides. I met Solsten here and thought his car and history would make for a great edition of HMA. As it turns out Solsten is also a huge Forza fan who has been playing since the original Forza Motorsport. You can find his Gamertag JpMn2 on the leaderboards of all the games in the Forza Motorsport series.

At a glance, or for that matter, even up close, Solsten’s Subie wagon might not make the average person think this car would be a show winner. Dig deeper, however, and you’ll find out there are numerous reasons why this wagon wins: First, there are very few of these old wagons around. Solsten has designed and fabricated some cool features on a shoestring budget and his enthusiasm for Subaru is above and beyond the average. If you can get past the rust and the dents, it’s one darn cool old wagon. This is all especially true when you bring it to an old school reunion.

To tell Solsten’s story we have to go back a few years. At 26, Solsten has been around Subaru’s since “they chose him,” as he puts it, when he was a teenager. His first car was a 1978 Subaru Brat he bought for a $100. “It had been under a tree for a decade. It had an inch thick of moss growing on it, it was odd and different, and it stuck out from other cars. I took it home and had it running that day,” Solsten said.

As a self-taught mechanic, Solsten has learned how to keep his cars on the road by busting his knuckles, taking things apart, and figuring out how they work. There are scars to prove it and Solsten almost lost his life while working on a Subie, but that didn’t stop him. It’s only natural to wonder how something like that happens and Solsten is happy to share the tale. “I had a ‘93 Subaru Loyale – I got it for free – all it needed was a fuel pump. [After I got it running] I drove it and started building a rally car out of it. Anyway, the auto [transmission] needed to go, so I got a 4wd five-speed wagon parts car for donor parts. I wanted to see if the parts car would run, so I pulled the plugs after trying to start it a few times. After doing so, I arced the starter which led to getting sprayed with a cylinder full of gas. It scared me and I threw my tools, which hit the battery and sparked and ignited me.”

“I thought, ‘Should I roll or run to the back into the water barrel?’ I rolled but it didn’t go out. Luckily, I had two very good friends there who saved my life. They put me out and got me ready for the ambulance. Two months and two weeks in ICU, six skin grafts, and a lot of rehab later, and I walked out when they thought I had recovered enough to leave,” Solsten said.

When Solsten got home, he found his friends had finished the five-speed swap for him as a surprise. All it needed was exhaust and wheels. So, a couple days later, with his arms still wrapped in bandages and slung to restrict movement, Solsten proceeded to weld up his new exhaust. Once it was finished Solsten and his friends put away a few drinks and celebrated life. “That rally car is long gone, but lots of good times, crazy adventures, and memories in that car were made,” Solsten said.

Now flash-forward to about a year ago, when Solsten saw an ad on Craigslist for two 1970s Subaru wagons for $200. Solsten called the poster at 11pm and told him he was interested and that he should take down the ad because he was coming to pick them up the next day. As promised, the next morning, Solsten and some friends showed up at the rural Redmond, OR home. The owner said the cars hadn’t been driven or run in years. Less than an hour later, using some fuel and batteries they brought down with them, both little wagons were running and the crew proceeded to drive them 200 miles to their new home. Solsten kept one and a friend kept the other.

The 1979 Subaru 1.6 stock puts out around 68 horsepower. With the work Solsten has done he figures he is getting somewhere around 110, but it has never been on a dyno. Solsten immediately started working on his new ride but, like most of us, his budget is limited. Resourcefulness and ingenuity have made up for a lack of deep pockets though. The first thing he did was to add a Weber carburetor and fabricate a custom header and exhaust. Later Solsten pulled the motor, got it cleaned up, resealed it, and added a ported and polished head before topping it off with a custom turbo setup. Sure, the little "quadrozontal" 1.6, as an early Subaru print ad refers to the flat-four, doesn’t make it racecar fast, but it does have some giddy up to it now as well as a cool sound. The car’s personality is its real charm. “It’s not fast like other cars, but it’s fun to come up to someone who laughs at the car because its different and then when they try to show off and pull away I just stay right next to them and smile… that’s priceless,” Solsten said.

The under the hood modifications were only the start. The wheels and suspension brought out the hidden-genius fabricator in Solsten. First off, these old Subies come with puny 13-inch wheels and nobody makes aftermarket wheels for them. So Solsten pulled the rear drums and swapped in disc brakes, then redrilled the hubs for a six-lug pattern to accommodate the 15-inch Nissan Pathfinder wheels he sourced.

Then, you look where the back seat is supposed to be and wonder what is going on there. The answer: This wagon rolls on air-ride suspension, and not just a couple bags and a fancy store-bought kit. Solsten fashioned a cantilevered system that incorporates the airbags from a 1980s Subaru XT4. The cantilever system was a necessity because the two-inch larger wheels took up all the space in the wheel well. Solsten says he can’t draw his designs, he just sees it when he looks at a piece of metal, and that’s how the system was devised and built. It works and this car is a daily driver, not just a weekend roller. In fact Solsten drove all the way from Idaho for FEST and for the shoot. He has friends locally but such a long trip (5-6 hours) is a testament to the fact that his design works. The car raises up for any off-roading it encounters and drops to a sneaky stance that turns heads and helps it pull through corners.

Watch this video of how the system operates and tell me that isn’t cool.

Solsten has more plans for his ride including a bigger motor, a bigger turbo, and plans to re-work the air-ride so he can lay it right down on the ground. I hope to see what he has accomplished at the Old School Reunion and FEST later this year.

Now check out the spec sheet and photos I shot with Solsten.

If you have comments about Solsten’s ride, post them in the HMA thread. JpMn2 isn’t on the forums to respond but I’m sure he will appreciate reading your comments as will I.

Back to the news