Heavy Metal Affliction - 2012 Range Rover Evoque
When I first saw Tim Paulsen’s 2012 Range Rover Evoque in a Facebook post from local car customization shop MeisterWerks , I was confused. My first thought was the car I was looking at was a Volkswagen Golf with a serious wide body kit. Then I noticed the sloping roof line and the sleek rear window that betrayed the ride’s British heritage. The Evoque makes a strong style statement on its own as was the intent of Range Rover when it introduced the Land Rover LRX concept car at the 2008 Detroit Auto Show. Thankfully when the Evoque came out of production it retained most of that conceptual allure. When coupled with Paulsen’s slammed concept and the work of the folks at MeisterWerks, it’s downright jaw-dropping.
As it turns out, my response of confusion followed by admiration is fairly typical among car people who have seen Paulsen’s ride. At a recent import car show, Paulsen brought the Evoque and his 2013 Lamborghini LP550-2. As I walked the show, I noticed there was more of a crowd around the Evoque than the Lambo. No doubt, the LP-550 is seriously sweet and you don’t see one up close every day but, you never see something like Paulsen’s Evoque.
Photo credit to Patrick McGeehee
That’s because there are only two Evoques rolling on AirRex air suspension in the world. This is the first one and the only one in the U.S. In fact, the system is a prototype from the Australian air ride specialists. Not a lot of people would think of dropping a vehicle that is specifically designed for off-road capability. You might even call it sacrilege, but, while unconventional, this Evoque effuses the VIP elegance that I believe suits the brand and the Evoque’s form. I would further argue, that even if you are not into the stance scene, the look really works; and to Paulsen, it’s all about looks.
Paulsen has, what he calls, “Car A.D.D.” A condition that forces him to always be thinking about his next car. “I've never been one to ponder the practicality of an item.” Paulsen said, “If I like it, I buy it, if it doesn't work out, I move on.” Paulsen is the youngest of seven brothers and sisters and has always been around cars being modified. When he was 13 he did his first transmission swap on an Mk1 VW Rabbit, and while today he is able to have most of his work done by local shops, he still turns a few wrenches.
Along the way, Paulsen has owned a couple slammed VWs, a 1961 Bug and a 1974 Thing. He has also owned a fair share of exotics, like a Ferrari 355, a Lotus V8 TT Esprit, an Aston Martin Vantage, Porsche GT3-RS and a couple Lamborghinis. In his sights is a Liberty Walk Ferrari 458. So the man has taste and he also likes to stand out in a crowd. The latter is something that the Evoque does no matter where it goes.
Photo credit to Patrick McGeehee
As a former Army Ranger, Paulsen isn’t afraid to be the first to jump, and as a Building Engineer, his wheels are always turning when it comes to designing. Previous to the Evoque, Paulsen owned a MINI Cooper GP –which you will find some similarity to (low, small, stout) -- if you look at his Evoque. He got to thinking about what the Mini Range Rover would look like dropped to the deck. First he printed out a photo of one, and manually “photoshopped” it by cutting out the wheels and recessing them into the wheel well. Next he bought a 1:24 scale die cast model of an Evoque, took it apart, and created a 3-D version of his vision. Yes, the concept worked, now to make it happen.
There aren’t a lot of Evoques out there to begin with. Paulsen hunted the nation for the right one. He found his black on black Dynamic model in Massachusetts and had it shipped back to Seattle. At the time Paulsen had chosen a static solution to lower the car and ordered KW Variant 3 coilovers from England. Thankfully, after some three months, his order had not shipped and he discovered the AirRex solution. At the time, the kit was still in development and Paulsen was the first to place an order. Another two months later his order arrived at MeisterWerks where it was assembled and installed.
Lowering an off-road capable SUV like the Evoque is already an aggressive choice, and Paulsen wasn’t sure how much further he wanted to go. The result is fitment that works without having to roll the fenders or remove the fender lining. The 20-inch wheels are one inch over the stock height, and they aren’t any wider. With the offsets, the speedometer is still accurate and nothing rubs. At our photo shoot, Paulsen had to air-up to get into a driveway and there was a little scrape, but a little scraping is cool, right?
Photo credit to Patrick McGeehee
As with anyone who is truly passionate about their car, it is never done. Paulsen has plans to upgrade the intake and exhaust. You may not know, but the Evoque is powered by a Ford Ecoboost variant. The four-cylinder turbo is peppy at 240-hp, but Paulsen got a cool idea from a photo. The lighting in the picture was just right and a shadow falling over the hood gave the impression of a Subaru STi-like intake scoop on the otherwise tame Range Rover hood.
There are a couple obstacles to overcome before chopping holes though. The Evoque has a high-mounted and highly restrictive air intake – for fording purposes – which Paulsen has no intention of making use of. So the hunt is on at present for an air-intake system that won’t throw an error code or reduce reliability. Given the strong aftermarket support for Ecoboost engines, finding a solution shouldn’t be a problem. The result will give the Evoque a more aggressive sound to match its look, and of course a little more juice.
More power is great but the overall goal of this build is all about aesthetics, Paulsen isn’t looking to race anyone, and is chasing his own vision of creating something seldom seen that sparks the response “What is that?” followed by “Man, that is cool.” Since that was my initial reaction, it seems he is getting the right bang for his buck.
I think Paulsen summed up his way of thinking pretty clearly. “I believe in love at first sight and many of my impulse purchases are based on looks.” Paulsen said, “Whether it's a jacket or a Lamborghini, for me, it all comes down to the looks.” That makes sense to me, it’s form over function.
Photo by johniwanna
Photo by johniwanna
Photo credit to Patrick McGeehee
Photo credit to Patrick McGeehee
Photo credit to Patrick McGeehee
Photo by johniwanna
Photo by johniwanna
Photo credit to Patrick McGeehee
Every Thursday Heavy Metal Affliction brings you car culture stories. We are your source for stories on cars from the Forza community, special builds, celebrity profiles and DLC car backstories.
Special thanks to Patrick McGeehee for his awesome photos and to Se7en1 Studios for the incredible video. Check out Se7en1 on Vimeo.
You can follow Heavy Metal Affliction on Instagram to get cool car photos in your IG feed.
See you tomorrow at 3 p.m. Pacific in the #ForzaFriday stream on Twitch. http://www.twitch.tv/forzamotorsport
Back to the news