Heavy Metal Affliction - 1996 Infiniti G20T
When life’s changes come at you, sometimes a love of cars needs to be set aside for practicality. For those that look back on their time with project cars as a phase, that is all fine and dandy. For those of us who truly have the bug, time and money will always be found to get the right car and pursue the vision we have for it.
It all comes down to finding a balance. A single guy can buy what he wants, drive it how he wants and maybe even pile up parts in the kitchen. Single life has its benefits, but so do companionship and family life. With the right partner, it doesn’t have to be one or the other, but compromises must be made.
For Peter Penev – Gamertag SR20 PWRD – when responsibility came calling in the form of his son being born, he sold off his project and parts and threw down for Daddy duty. There was a period of time where all Penev had to get his car fix was Forza games. “Forza kept my withdrawal at bay,” Penev said.
Penev has always been a car junkie, particularly a Nissan guy. Penev’s stepdad is a Nissan master technician which contributed to his brand affiliation. As a boy, Penev would follow his stepdad around the shop. When it came time to get a job to help see him through college, he already had a foot in the door at the local dealership. Starting off as a parts advisor, Penev’s love of cars made the job fun, and he stuck with it. Years later he is now the dealership’s motorsports consultant.
Penev had a pair of Nissan Sentra SE-Rs. One had a GTi-R SR20DET turbo swap, but was just a pure driver’s car; no radio, or A/C, and a stiff suspension. The other was a SE-R Spec V. The former was sold and latter has been left mostly stock and serves its time as a daily driver.
Fortunately for Penev, once finances settled and his son had grown out of babyhood, his wife suggested he start looking for the right car to buy so he could satisfy his need to be building something.
So the hunt for new project began. He wanted something car culture minded folks would pick up on and a look that wouldn’t give away the car’s potential. Penev found a 1996 Infiniti G20T. That got him his Nissan fix, delivered on “family-friendly” as a four-door, and was a rarity. The limited edition T model – which stands for “Touring” – came with a black leather interior, white exterior, a five-speed, and a limited-slip differential. It is powered by the well-loved SR20DE engine. There were only about 2,000 models with these specs built.
The Nissan slogan for the G20 was, "Born in Japan. Educated in Europe. Now Available in America." Each portion of this slogan has meaning. The G20 is based on the Nissan Primera of Japan. The G20’s multi-link suspension and independent rear arms were developed in Germany. Proving that suspension’s capability, the Primera got some racing credibility in the Japanese Touring Car Championship as well as in the British Touring Car Championship.
Any car fan can tell you, having a race-proven background contributes to the appreciation for the model and gives that much more credence for a performance build. After all, if the factory built them up for racing, why can’t the average Nissan lover with a little budget, a little know-how, and the right parts?
Even though Penev didn’t intend to race the G20 specifically, he did want a car that could surprise anyone who might give him a rev and a wink at a stoplight. So Penev did some research and found a local Connecticut shop that specializes in the SR20 platform, Marsh Tuning and partners Morfius Performance..
Penev knew he was in good hands when he saw that these guys built a car that holds the record for fastest naturally-aspirated SR20-powered car in the U.S. Even though his goals were a much more sedate – 300-350 whp – knowing these guys could do much more was an ace in his back pocket, one he may draw later should the horsepower bug bite again as it often seems to do.
Penev and the guys at the shop threw around some ideas, and eventually they settled on a Nissan Gti-R turbo and tune for the existing 170,000 mile motor in the G20. Sadly, once boosted, it wasn’t long until the well-used motor blew up due to worn rings and possibly faulty fuel pressure.
On to the next level. Penev sourced a donor SR20, tore it down, and prepared it to handle more boost. The top end received a valve job and resurfacing, while the bottom end got completely rebuilt with new bearings, rings, and a polished crank. Since fuel pressure was possibly at fault in the first build, Penev added an Aeromotive Fuel pressure regulator, and Denso Yellow top side feed Injectors, along with an AEM Fuel pump. As you may know, when you run boost, it takes more fuel, so this was a logical next step.
About a month later after proper break in, the #1 cylinder gave out. A diagnosis of the problem led to faulty fuel delivery. So they pulled the injector and sent it in for testing. As they had expected, it was proven to be the culprit.
Penev and the team at Marsh/Morfius considered rebuilding the motor again but that idea was scrapped when Penev decided to go with an imported SR20VE, known for its high-revving capability thanks to variable valve lift and timing. Consider this Nissan’s version of Honda’s VTEC. You would find this engine in the JDM Nissan Primera and it came with only 36,000 miles on it to boot.
When the engine came in, the work started all over again. They pulled the head, then had it cleaned, and resealed after it checked out fine. The bottom end got a cleaning, and went back together with ARP Head studs and a new head gasket. For fuel this time around they weren’t taking any chances. Penev installed some old-stock HKS injectors from an RB26DETT after they were sent out for cleaning and testing to ensure there would be no more fuel issues.
Upon final assembly, they took the car to a dyno for final tuning. With 15 psi boost it pulled 328whp on the dyno. Right where Penev was hoping to see the car’s power on this first stage build, and definitely enough to surprise anyone who thinks this is just another family car.
Penev’s son rides in a Recaro child seat, and according to his father, loves to ride in the G20T. Recently the family took a trip to the 2015 SR20 convention and now Penev has picked up a bigger turbo and the Nismo front grill you can see in the photos below.
Family friendly? Check. Ready to represent for Penev’s love of Nissan? Check. Done? Of course not, this is Heavy Metal Affliction.
Back to the news